Key Product Features

• Exact OEM Geometry – Designed as a direct bolt-on replacement for part numbers 83401-1G000 and 749-456, ensuring no drilling or modifications are required during setup.
• Reinforced Steel Construction – The high-strength steel rail is coated for rust resistance, while the high-density plastic rollers provide smooth, low-friction travel.
• Heavy-Duty Gear Mechanism – The manual crank interface features hardened teeth to prevent stripping, even with frequent daily use.
• Anti-Binding Design – Precision-tensioned cables and tracks prevent the window from tilting or binding in the weatherstripping.
• Vehicle Specific Fit – Tailored specifically for the 4-door sedan platforms of the Hyundai Accent and Kia Rio/Rio5.

Technical Specifications

Vehicle Compatibility

This regulator is compatible with the following 4-door models:

• Hyundai Accent Sedan (2006, 2007, 2008, 2009, 2010, 2011)
• Kia Rio Sedan (2006, 2007, 2008, 2009, 2010, 2011)
• Kia Rio5 Hatchback (2006, 2007, 2008, 2009, 2010, 2011)

Note: This part is specifically for 4-door models with manual windows. It will NOT fit 2-door coupes, hatchbacks (3-door), or vehicles equipped with power windows.

Installation Guide

1. Safety First: Wear eye protection and work gloves. Ensure the window glass is taped in the "up" position before starting.
2. Panel Removal: Use a trim tool to remove the door handle trim and armrest screws. Carefully pop the plastic clips to pull the door panel away.
3. Glass Support: Carefully lower the glass manually until you can access the bolts holding it to the regulator, then slide the glass up and tape it securely to the door frame.
4. Regulator Removal: Unbolt the mounting nuts from the inner door skin. Slide the old, damaged regulator out through the access hole.
5. New Unit Setup: Insert the new 83401-1G000 regulator and hand-tighten the mounting bolts to check alignment.
6. Final Assembly: Attach the window glass to the regulator, tighten all hardware, and grease the tracks for even smoother operation.
7. Testing: Temporarily install the crank handle to verify the window moves freely before snapping the door panel back into place.

Why Choose Our Regulators?

Aftermarket window regulators often fail due to thin steel and poor gear alignment. Our parts are sourced from manufacturers specialized in automotive glass systems, using thicker gauge steel and superior lubricants. This manual regulator offers a factory-tight feel, eliminating the "loose" handle sensation common in worn-out units. Restore your car's functionality with a part designed to last another decade.